Industry Guides

Single-Source vs. Multi-Vendor Aluminum Extrusion Sourcing

Where lead-time and quality risk sits when casting, extrusion, finishing and machining are split among vendors, what one plant changes, and what it does not.

Product guides and technical content 5 min read

Single-source aluminum extrusion means one plant casts, extrudes, finishes, machines and packs the profile, removing hand-offs between vendors. At the Bor Alüminyum plant in Çerkezköy, Türkiye, every stage runs on one site; length limits are 12 m extruded, 11.5 m powder coated and 7.5 m anodized. Freight and delivery dates for U.S. orders are set in each quote.

Buying aluminum extrusions from one plant that casts, extrudes, finishes and machines them removes the hand-offs between separate vendors. Each hand-off adds a shipment, a place in another company's schedule and a point where responsibility for a defect can be disputed.

A single source does not remove ocean freight from Türkiye, and it does not make lead time disappear. It reduces the number of companies whose schedules, inspections and shipments must line up before your profiles leave the plant.

Where Do Hand-Offs Happen in Multi-Vendor Sourcing?

In a split supply chain, a hand-off happens each time a profile moves to another company: billet producer to extruder, extruder to finisher, finisher to machine shop. Each move is a separate purchase order and a separate delivery.

  • Transport between sites: profiles are packed, shipped and unpacked before the next stage can start.
  • A new queue: the next vendor fits your batch into its own production plan.
  • A new inspection: each vendor checks its own stage against its own records.
  • Split responsibility: a fault found after finishing may have started at the billet, the press or the finishing line.

The last point matters because the stages are linked. Billet structure affects how well the billet extrudes and how the profile surface looks, as the billet casting page explains. When three companies made the billet, the profile and the finish, finding a cause means comparing three sets of records.

What Changes When One Plant Does Every Stage?

At the Bor Alüminyum plant in Çerkezköy, Türkiye, every stage from billet casting to packing runs on one site. The profile does not leave the plant between stages, and one company is responsible for the result.

StageAt the Bor plantRecorded check or limit
Billet castingEight 6xxx alloys, from 6005 to 6951, cast in-houseChemistry analyzed during alloying and again after casting; structure examined after homogenization
ExtrusionTwo 5-inch presses, one 7-inch press and one 2,800-ton 9-inch pressDimensions controlled to EN 755 and EN 12020; lengths up to 12 m
Powder coatingHorizontal line (2008) and vertical line (2020)QUALICOAT label for coating lines 1 and 2; lengths up to 11.5 m
AnodizingMatte, bright and colored finishesQUALANOD label for architectural anodizing; lengths up to 7.5 m
Mechanical processingCutting, drilling, threading, milling, welded joining and moreDimensions and tolerances checked against your drawing
PackagingStandard packaging or the form you requestMaterials chosen to protect the finished surface

One quality management system covers the main processes. Bor Alüminyum's ISO 9001:2015 certificate lists billet casting, extrusion, anodizing and powder coating in its scope. The current documents and their validity dates are on the certificates page.

Plant capacities and export figures are on our About page, and press sizes on the extrusion page.

Which Length Limits Should You Check Before Ordering?

Check the maximum length of every stage your profile passes through, because the shortest stage sets the longest part you can order. At Bor, the limits are:

StageMaximum profile length
Extrusion (mill finish)12 m (about 39 ft)
Powder coating11.5 m (about 37.7 ft)
Anodizing7.5 m (about 24.6 ft)

An anodized part longer than 7.5 m needs a joint in the design, or a powder-coated finish instead. In a split chain, you collect these limits from each vendor separately and check that they match.

What Does a Single Source Not Change?

A single source does not shorten the distance to the United States. Profiles are made in Çerkezköy, Türkiye, and shipped by sea, land or air.

Forklift loading crated aluminum profiles onto a truck trailer inside a plant hall
Crated profiles being loaded for shipment.

Full-container orders usually travel by sea; small, urgent shipments can go by air. Freight cost and delivery date depend on the quantity, the delivery address and the Incoterm, such as FOB, CIF or DDP. That is why both are stated in the quote for your order.

Quotes and orders for U.S. customers are handled by BorUSA Aluminum LLC in Fort Lauderdale, Florida, which ships to all 50 states. Give your target delivery date when you ask for a quote, so production and the shipping method can be planned against it. Packing options are on the packaging and shipping page.

Questions to Ask Any Extrusion Supplier

Ask each supplier which stages it runs itself and which it sends out. Then ask these questions for every stage:

  1. Who casts the billet, in which alloys, and how is the chemistry checked?
  2. Which press will run the profile, and does the cross-section fit it?
  3. Which finishing lines are in-house, and what is the maximum length on each?
  4. Which machining operations are done in-house?
  5. Which processes does the quality certificate cover, and until when is it valid?
  6. Who answers for a defect found after finishing or machining?
  7. How are freight and the delivery date set, and under which Incoterm?

Bor's answers to the first five are on its production pages and the certificates page. The extrusion page lists the largest cross-section each press can produce.

How to Request a Quote for a Custom Profile

Send your drawing and order details to Bor USA by email at info@bor-usa.com. You can also start with the contact form and send the drawing by email afterwards. Include:

  • A DWG, DXF or PDF drawing with dimensions and tolerances
  • Alloy and temper, for example 6063-T5 or 6061-T6
  • Finish: mill, a RAL code and gloss level for powder coating, or matte, bright or colored anodizing
  • Machining details: holes, threads such as 1/4-20 UNC or M6, and visible faces
  • Lengths, quantity per order and expected annual volume
  • Packaging needs, delivery address, Incoterm and target delivery date

Related guides: how aluminum extrusion works in 10 steps and choosing an extrusion supplier for automotive OEM projects.

Frequently asked questions

Is single-source aluminum extrusion always faster?
Not always. It removes transport and scheduling between separate vendors, but freight from Türkiye, order size and the Incoterm still set the delivery date. Bor USA states the delivery date in the quote for each order.
Which stages does Bor run in its own plant?
Billet casting, extrusion, powder coating, anodizing, mechanical processing and packaging all run at the Bor Alüminyum plant in Çerkezköy, Türkiye.
What is the longest anodized profile Bor can supply?
7.5 m, about 24.6 ft. Powder-coated profiles can be up to 11.5 m long and mill-finish profiles up to 12 m.
What should I send for a custom profile quote?
A DWG, DXF or PDF drawing with tolerances, the alloy and temper, the finish, lengths and quantities, plus the delivery address, Incoterm and target date. Email it to info@bor-usa.com.
Bor USA Content Team

Author: Bor USA Content Team

The Bor USA Content Team writes and maintains the guides on this site. Articles draw on the production experience of Bor Alüminyum, the family-owned aluminum extrusion manufacturer founded in 1997 in Çerkezköy, Türkiye, and on BorUSA Aluminum LLC's work with customers in the United States from Fort Lauderdale, Florida. Technical statements refer to published standards such as EN 755 and EN 12020.

0 comments

Leave a comment

Your comment will be published after review.

Your rating:

Bor USA

Get a Quote

Tell us briefly what you need and we will get back to you with a quote.

Your details are only used to respond to this request. Privacy Notice