Aluminum Extrusions for Construction & Architecture

Home > Industries > Construction & Architecture
Vertical powder coating line carrying aluminum profiles at the Bor Alüminyum plant

Profiles for windows, facades and railings

Bor USA supplies extruded aluminum profiles for buildings: window and door frames, facade and curtain wall profiles, sunshade louvers, glass railing and handrail profiles, window sills, rolling shutters and structural framing. We extrude most of them from 6063-T5, which gives a clean finish, or from 6061-T6 where the profile carries more load, and then powder coat or anodize them in the same plant. Our factory production control for these extruded construction products is CE certified to EN 15088.

Alloys and tempers
6063-T5, 6061-T6and 6082-T6 for custom profiles
Powder coating
RAL and custom colorsprofiles up to 11.5 m, QUALICOAT license 1467
Anodizing
Matte, bright, coloredprofiles up to 7.5 m, QUALANOD license 1654
Extruded length
Up to 12 mabout 39 ft

What building profiles are up against

Hold its color outdoors

Facade, window and railing profiles are exposed to sun and rain for decades, so the finish matters as much as the alloy. Our powder coating lines run under a QUALICOAT license and our architectural anodizing under a QUALANOD license, the international quality labels for these finishes.

Limit heat loss through the frame

Aluminum conducts heat well, so we can supply our window frame profiles and the C60 window series with an optional thermal break for better energy performance.

Fit the system it belongs to

Window, sliding and facade profiles have to match glass, gaskets and hardware. We control dimensions to EN 755, and to EN 12020 for precision 6060 and 6063 profiles.

Long runs, fewer joints

We extrude up to 12 m and powder coat up to 11.5 m, so long facade, railing and sunshade runs need fewer joints on site.

Choosing the alloy for building work

6063 is the most common alloy for aluminum extrusion and the usual choice for visible architectural work such as window frames, door frames and sign frames. Where a profile carries more load, we use 6061 or 6082 instead.

Alloy and finish guide for building profiles
AlloyTypical use
6063-T5Window and door frames, sliding systems, facade covers, sills, insect screens, interior trim.
6061-T6Railings, balcony bases, structural and load-bearing framing.
6082-T6Custom structural profiles; the European counterpart of 6061.
6060Interior and architectural profiles where surface quality matters more than strength.

Sources: 6063 aluminium alloy (Wikipedia); 6061 aluminium alloy (Wikipedia). We cast every alloy in this table as billet in our own casthouse; for the process, see billet casting.

Architectural profiles in our catalog

All architectural aluminum profiles →

Further reading for architects and builders

Planning windows, a facade or railings?

Send us the profile drawing or system name with the alloy, the RAL code or anodizing class, and the lengths and quantities you need.

Request a quote

Frequently asked questions

Which aluminum alloy is used for window and door frames?
6063 is the usual alloy for window and door frames because it extrudes into complex shapes with a smooth surface that takes anodizing and powder coating well. We supply window frame profiles in 6063-T5 or 6061-T6.
Do your window profiles have a thermal break?
Yes, we can supply our window frame profiles and the C60 window series with an optional thermal break. Tell us the system and the performance you need when you ask for a quote.
Which finishes are available for architectural profiles?
We powder coat in RAL and custom colors on profiles up to 11.5 m and anodize in matte, bright or colored finishes on profiles up to 7.5 m. Our coating lines hold a QUALICOAT license and our architectural anodizing a QUALANOD license.
Are your construction profiles CE marked?
The factory production control for extruded aluminum construction products at the Bor Alüminyum plant is certified to EN 15088 by Kiwa (certificate 1984-CPR-0033/01). You can see the certificate on our certificates page.
Can you produce a custom facade or window profile?
Yes. We extrude to your drawing in 6063, 6061 or 6082. Our plant has produced more than 7,000 profile types, so ask us whether an existing die already fits your design.

References

Bor USA

Get a Quote

Tell us briefly what you need and we will get back to you with a quote.

Your details are only used to respond to this request. Privacy Notice