Electrostatic Powder Coating

Electrostatic powder coating sprays an electrically charged dry powder onto aluminum profiles and cures it in an oven into a hard, even finish.

  • Horizontal and vertical lines
  • Lengths up to 11.5 m (37.7 ft)
  • RAL and custom colors
  • 20,000 metric tons a year

What powder coating gives your profiles

Pick one to read the detail.

Any RAL colorChoose from the RAL range or ask for a custom color. Give the RAL code and gloss level in your order.

Powder coating for aluminum profiles

Electrostatic powder coating sprays an electrically charged dry powder onto aluminum profiles and cures it in an oven into a hard, even finish. We coat profiles on two lines, a horizontal line installed in 2008 and a vertical line installed in 2020, in RAL colors and in custom colors on request. We can coat profiles up to 11.5 m long, and our annual capacity is 20,000 metric tons.

Vertical powder coating line carrying aluminum profiles

How powder coating works

  1. Pretreatment

    We clean and pretreat the profiles so the coating bonds firmly to the aluminum.

  2. Hanging

    We hang the profiles on the conveyor of the horizontal or vertical line.

  3. Electrostatic spraying

    Spray guns give the powder an electric charge. The charged particles are drawn to the grounded profile and wrap around its edges, so the coating is even.

  4. Curing

    In the oven the powder melts, flows and hardens into a continuous film.

  5. Unloading

    We take the cooled profiles off the line, check them and pack them to protect the finished surface.

Electrostatic powder coating guns spraying aluminum profiles
Electrostatic spray guns
Horizontal powder coating line with aluminum profiles hung on the conveyor
Horizontal coating line

Why choose powder coating

Any RAL color

Choose from the RAL range or ask for a custom color. Give the RAL code and gloss level in your order.

Durable, even film

The cured coating is tough and covers edges and corners evenly, which suits windows, doors, facades, railings and furniture.

No solvents

Powder coatings are solvent-free, and overspray can be recovered for reuse.

Long lengths

With an 11.5 m coating length, long facade and railing profiles do not need extra joints.

Need powder-coated profiles?

Give us the profile code or drawing, the RAL code and gloss level, the cut length and the quantity, and we will quote the coated profiles.

Request a quote

Frequently asked questions

What is electrostatic powder coating?
It is a dry finishing process. An electric charge is applied to a fine coating powder, which is then sprayed onto a grounded aluminum profile. The powder sticks to the profile and is cured in an oven, where it melts and hardens into a continuous, durable film.
Which colors can you powder coat?
RAL colors, plus custom colors on request. Include the RAL code and the gloss level you need in your quote request.
What is the maximum profile length for powder coating?
We coat profiles up to 11.5 m (about 37.7 ft) long on either the horizontal or the vertical line.
Powder coating or anodizing: which is better for aluminum profiles?
Powder coating gives you almost any color and covers small surface marks, and we apply it to profiles up to 11.5 m. Anodizing keeps the metallic look of aluminum and creates an oxide layer that is part of the metal, so it cannot peel; we anodize profiles up to 7.5 m. Choose powder coating for color, anodizing for a metallic finish. See anodizing.
How thick is a powder coating on aluminum?
Coating thickness is set by the project specification. Architectural specifications commonly ask for about 60 microns or more. State the required thickness in your order.
Is powder coating environmentally friendly?
Powder coatings contain no solvents, so they release very few volatile organic compounds (VOCs). Overspray powder can be collected and reused.

Bor USA

Get a Quote

Tell us briefly what you need and we will get back to you with a quote.

Your details are only used to respond to this request. Privacy Notice